护坡模具在进行加工的时候，需要通过灌浆的管口将泥浆缓缓的浇筑在模具中，然后再放置平台上面进行振捣的处理

When processing the slope protection mold, it is necessary to slowly pour the mud into the mold through the grouting pipe mouth, and then place it on the platform for vibration treatment

而钢模具则不一样，钢模具是需要用振动棒来进行操作的，所以说在这方面因为振动平台他的震动力度更加均匀，对模具来说更加的安全温和，所以说我们建议塑料模具使用振动平台来处理

However, steel molds are different. Steel molds require the use of vibration rods for operation. Therefore, in this regard, because the vibration force of the vibration platform is more uniform, it is safer and milder for the mold. Therefore, we recommend using a vibration platform for plastic molds

而之后进行晾晒的时候需要将护坡模具放置在阴凉避光的环境中，因为过于高温的天气会对整个塑料模具造成长时间的照射，会让整体出现发黄发脆的情况，这样子的塑料模具就不能够进行使用了

When drying, it is necessary to place the slope protection mold in a cool and dark environment, as excessively high temperatures can cause long-term exposure to the entire plastic mold, resulting in yellowing and brittleness. As a result, the plastic mold cannot be used anymore

        

还有就是在我们操作的过程中要注意避免让一些尖锐的物品直接的接触到塑料模具，给护坡模具表面造成了难以维修的划痕

Also, during our operation, we should be careful not to let sharp objects directly contact the plastic mold, causing difficult to repair scratches on the surface of the slope protection mold

而且再出现磨损的时候要远离这种环境，并且储存护坡模具的时候也要维持整个仓库的干净整洁。

And when wear occurs again, it is important to stay away from this environment, and when storing slope protection molds, it is also important to maintain the cleanliness and tidiness of the entire warehouse.